Shieldcoat MOULDSHIELD C comes in 15 litre pails and is to be diluted 1:5 with water.
What does MOULDSHIELD C do?
MOULDSHIELD C (C is for cleaner) is an economical biodegradable and dilutable high powered cleaner for oils, grease or fungal growth on fibro, terracotta, concrete tile roofs, concrete driveways and paths, bricks and most hard surfaces.
What is MOULDSHIELD C safe to use on?
Shieldcoat MOULDSHIELD C contains corrosion inhibitors and is safe to use on most surfaces when used at the recommended concentration. However care should be exercised and contact times should be kept short when cleaning soft metal such as aluminium. MOULDSHIELD C is water soluble.
How do I use MOULDSHIELD C?
Shieldcoat MOULDSHIELD C once diluted is to be applied by a soft brush or broom and then washed off by at least a 3000 psi pressure washer in most cases.
Do you want more details on Mouldshield C? - SEE PDF’s ON THE TOP RIGHT SIDE OF THIS PAGE.
A: It is difficult to give a coverage rate on 15lt of Moulshield c because it can be diluted between 5:1 up to 20:1 depending on strength needed and again how its applied, sprayed, watering can or broom. Generally one 15lt is enough for a whole driveway, anything up to approximately 200m2, leaving you with enough left over to do your bit of cleaning around the home.
A: It is difficult to give a coverage rate on 15lt of Moulshield c because it can be diluted between 5:1 up to 20:1 depending on strength needed and again how its applied; sprayed, watering can or broom. Generally one 15lt is enough for a 3 bedroom house roof, leaving you with enough left over to do your bit of cleaning around the home.