Apply for Trade Price Discounts
Discounted Prices for Bulk Purchases

'How to' Guide: Timber Floor

Preparation work

When applying a coating to new or existing timber floor preparation is very important! Shieldcoat Floorshield system is a very hard wearing acrylic coating system designed for coating new or existing timber floors. The first thing you will have to do is, sand the timber floor with suitable equipment. Then punch and fill nail holes with Redifill wood putty. Carry out the fine sanding and vacuum.

When applying a coating to new or existing timber floor preparation is very important!

Preparation coatings

Once timber floor is vacuumed, apply one coat of Shieldcoat Floorshield clear or coloured using lamb’s wool applicator. Allow at least 24 hours to dry.

Finish coatings

Lightly sand and vacuum timber floor. Apply a second coat of Shieldcoat Floorshield followed by a 3rd coat approximately 2 hours later.

Important Information

If you are DIY make sure that you read all application instructions thoroughly. When carrying out sanding and coating work on your timber floor, be sure to wear a respirator and other needed safety equipment.

Final word

Surface should be dry within 6 hours, however avoid putting heavy objects on the floor for about 3-5 days.

Related Products

$124.80USD

FLOORSHIELD Protective coating for concrete or timber floor