CONCRESHIELD X (All Colours) hard wearing solvent paint

Shieldcoat CONCRESHIELD X (All Colours) is an all-acrylic solvent-based paint or coating that is specifically recommended for colouring and protecting concrete driveways and paths. Also if you want a non slip surface then you can apply Shieldcoat's ANTI-SLIP 1- (Refined Silica) by sprinkling, or mix ANTI-SLIP 2- (Wax Beads) or sprinkle Shieldcoat's ANTI-SLIP 3- (Refined Silica) into the first coat of CONCRESHIELD X (All Colours) to give you the needed grip. Shieldcoat CONCRESHIELD X (All Colours) resists marking by tyres and is reasonably resistant to chemical spills. CONCRESHIELD X (All Colours) can be applied by roller or by airless spray application.

Shieldcoat has chosen a high quality resin for CONCRESHIELD X (All Colours), the resin’s characteristics including excellent durability, good wet adhesion properties, great gloss retention, low water sensitivity and thorough dry capabilities. These qualities in Shieldcoat CONCRESHIELD X (All Colours) give you great value for money!

Do you want more details on CONCRESHIELD X (All Colours)? - SEE PDF’s under PRODUCT FILES

Yes, you need to apply a solvent based sealer like Shieldcoat's SHIELDSEAL X to ensure a proper adhesion and longevity out of your coating CONCRESHIELD X (All Colours).

Yes, CONCRESHIELD X (All Colours) is moderately oil resistant. CONCRESHIELD X (All Colours) can handle oil being spilt on it, if it is not left lying on the paint for an extended period of time, otherwise the oil will eventually soften the paint and stain it. If you clean the spillage off within an hour then CONCRESHIELD X (All Colours) will be suitable. However, if you are needing a more durable coating then Shieldcoat's CONCRESHIELD 2 PAC (All Colours) would be more suitable to your application.

CONCRESHIELD X (All Colours) becomes slip resistant with the addition of either Shieldcoat's ANTI-SLIP 1- (Refined Silica) by sprinkling onto the first coat after it has been applied and before it dries, or mix ANTI-SLIP 2- (Wax Beads) that are mixed into the pails before applying the first coat or sprinkle Shieldcoat's ANTI-SLIP 3- (Refined Silica) onto the first coat of CONCRESHIELD X (All Colours) after it has been applied and before it dries, then the second coat goes over the top and locks the ANTI-SLIP in.

In the top right corner of this page there is a coverage calculator in a blue box. All you need to do is type in how many coats you will need to apply, then the dimensions OR the square meters that you need to cover, then press the red tick box, the calculator it will work out the quantity that you will need to do your job.

Details on applying this product can be found in two places on this website,
1.On the DIY How To Projects information pages, on that page just select the job that you are needing to do from the blue list on the left side and that will take you to the page that has the detailed step by step process pf your job methods of application for CONCRESHIELD X (All Colours).
2. Or you can download the product and application PDF's.

CONCRESHIELD X comes in a standard range of colours, which you can view from the drop down list titled 'Colour Chart' that is above the photo of the product on this page. Or you can request a price for any other colour, you like, some colours may incur an additional charge.

Yes we have a clear coating, it's called Shieldcoat's CONCRESHIELD X (Clear Glaze), see the details by clicking on the product below, in the Concrete Floor Coating category.

You will need to re coat CONCRESHIELD X (All Colours) every 2 years to maintain the coating, as over time the sun will break down any solvent-based coating. By re coating it every 2 years you will be guaranteeing that you have a long lasting coating.

You are best to re coat CONCRESHIELD X (All Colours) every 2 years to maintain the coating, as with any solvent-based coating. If it is not exposed to the sun at all then it will last a lot longer. However, by re coating it every 2 years you will be guaranteeing that you have a long lasting coating.