NATURAPATCH Coarse acrylic patching compound

Planning to apply an acrylic render finish to your blue board? Shieldcoat’s NATURAPATCH Coarse is water based acrylic render patching compound that is designed to fill Blueboard joints, in conjunction with NATURATAPE, and flush corner beads and expansion joint beads ready for the acrylic render finish of your choice. After applying up to two coats of NATURAPATCH Coarse to your blueboard joints and corner beads you will be ready to apply ALFRESCO Medium Sand acrylic render as a base coat and then choose the finish you like best either ALFRESCO Graincoat acrylic render which gives you a coarse almost sandstone grained render finish, ALFRESCO Medium Sand acrylic render for a medium grained finish or for a very fine finish you can apply ALFRESCO Fine Sand acrylic render as the finish coat.

Shieldcoat has chosen specific resins for their NATURATEX range, the resins characteristics including excellent bonding characteristics, great durability, good flexibility once it dries and washes up in water. These characteristics in Shieldcoat’s NATURAPATCH Coarse give it excellent longevity, make it very easy to use and give you great value for your money!

NATURAPATCH Coarse is such a good product that there is very little preparation that you need to do before applying it. However, so you get the best finish and good longevity out of your acrylic render finish there are two places on this website where you can find detailed step by step 'How to' guides as outlined below.
1. On the DIY 'How To' Guides information page, just select the job that describes what you are needing to do from the blue list on the left side and that will take you to the page that has the detailed step by step process including the required preparation work for your job and the methods of application for NATURAPATCH Coarse.
2. Or you can download the product and application PDF's.

In the top right corner of this page there is a coverage calculator in a blue box. All you need to do is type in how many coats you will need to apply, then the dimensions OR the square meters that you need to cover, then press the red tick box, the calculator it will work out the quantity of NATURAPATCH Coarse you will need to do your job.

Details on applying this product can be found in two places on this website,
1. On the DIY 'How To' Guides information page, just select the job that you are needing to do from the blue list on the left side and that will take you to the page that has the detailed step by step process of your job and methods of application for NATURAPATCH Coarse.
2. Or you can download the product and application PDF's.