ANTI-SLIP (Wax Beads) a medium grade anti slip additive
ANTI-SLIP (Wax Beads) a medium grade anti slip additive
Shieldcoat's ANTI-SLIP (Wax Beads) is an additive that comes in 250-gram and 500-gram pails and provides a medium anti slip surface for usually slippery surfaces such as step treads, ramps and areas that are regularly wet.
Do you have an area that becomes slippery when it gets wet on your concrete driveway, garage floor, stone, tiles or cement path? ANTI-SLIP (Wax Beads) is a medium grade additive that provides a good non-slip surface on step treads, ramps and areas that are slippery when wet. You mix ANTI-SLIP (Wax Beads) into first coat Shieldcoat's FLOORSHIELD, before you apply the first coat to for your concrete driveway, garage floor, stone, tiles or cement path, or alternatively you can sprinkle them on the top of your first coat while it is still wet. When applying the second coat there is no need to mix in ANTI-SLIP (Wax Beads), it is only required in the first coat.
A 500 gram pail of ANTI-SLIP (Wax Beads) is designed to cover the same area that a 15 litre pail covers. So if you work out how many pails you need for your first coat, then this is how many 500 gram pails of ANTI-SLIP (Wax Beads) you will need for your job.
Details on applying this product can be found in two places on this website,
1.On the 'DIY Guides' information page, on that page just select the job that you are needing to do from the list and that will take you to the page that has the detailed step by step process of application for the ANTI-SLIP (Wax Beads).
2. Or you can download the product and application PDF's in the right side of this page.