STENCILSHIELD Top & Base Coat (All Colours) for driveways
STENCILSHIELD Top & Base Coat (All Colours) for driveways
Shieldcoat’s STENCILSHIELD Top & Base Coat is hard wearing premixed acrylic stencil coating for both concrete driveways and cement paths. That’s right, there is no mixing required! STENCILSHIELD Top & Base Coat is water based and comes in 15 litre pails making it easy to use and washes up in water.
Shieldcoat CONCRESHIELD X (Clear Glaze) is all-acrylic solvent-based clear glaze paint or coating that is specifically recommended for protecting concrete or stencil driveways or slate or stone paths. Also if you want a non slip surface then you can mix ANTI-SLIP 2- (Wax Beads) into the first coat of CONCRESHIELD X (Clear Glaze) to give you the needed grip. Shieldcoat CONCRESHIELD X (Clear Glaze) resists marking by tyres and is reasonably resistant to chemical spills. CONCRESHIELD X (Clear Glaze) can be applied by roller or by airless spray application.
Do you have a tired old or new concrete driveway that needs that lift or needs to match in with your house or building? Shieldcoat’s STENCILSHIELD Top & Base Coat is designed in conjunction with STENCILSHIELD Primer Plus for going onto concrete driveways and cement paths to create a brick, stone, paver or tile look. STENCILSHIELD Top & Base Coat is great if you need a non slip surface as it has a textured finish to provide grip and traction. You can choose from a range of Main, Boarder and Rosette stencils to create the patterns and style that suits you. Shieldcoat’s STENCILSHIELD Top & Base Coat comes in many standard colours, you can choose from the pallets in the drop down above the main product photo, or you can request a custom colour.
Shieldcoat’s STENCILSHIELD Top & Base Coat comes premixed, so there is no need to mix in oxides on site, it arrives to you with the colour that you have chosen already mixed into the STENCILSHIELD, this locks the colour into the resin and therefore is highly resistant to fading unlike the cement based products that fade over time. Shieldcoat’s STENCILSHIELD Top & Base Coat is based on high quality a resin specifically designed for hard wearing and extreme conditions. STENCILSHIELD Top & Base Coat resin has great gloss levels is flexible once it dries and has a long pot life to make it easy to apply and washes up in water. For best results, apply STENCILSHIELD Top & Base Coat with a hopper gun that is operated with a compressor or you can use a texture roller. Shieldcoat’s STENCILSHIELD Top & Base Coat represents great value as it provides a long term solution to covering over your old driveway with many options as to finish.
Do you want more details on STENCILSHIELD Top & Base Coat? - SEE PDF’s UNDER PRODUCT FILES
Because STENCILSHIELD Top & Base Coat has the colours directly mixed into the resin this makes the colours more stable and resistant to fading. Also STENCILSHIELD Top & Base Coat is premixed so there is no time consuming mixing of the product on the site, therefore you will be able to finish the job a lot quicker than if you where using the cement based product.
No, you don’t need to use a stencil with STENCILSHIELD Top & Base Coat. You can mark out a boarder brick or paver pattern that suits you with Stencil Tape or you can apply STENCILSHIELD Top & Base Coat on it’s own, obviously after you have carried out the needed preparation eg cleaning it with MOULDSHIELD C and applying STENCILSHIELD Primer Plus.
Yes, you do need to apply a sealer over the top of STENCILSHIELD Top & Base Coat. This helps resist marking from car tyres and also prevents any moisture from getting under the top coat.